HP ProLiant ML150 driver for

[kerberos_1]

hi friends,

i have ml150 g5 server. i install from floppy during installation of win 2003 server with f6 the LSI_SAS driver. And i can see the partition, i can create partition and format, but ater the copy of the files, appeares a message:

Insert the disk labeled:

LSI Fusion-MPT SAS Storport Driver into drive A:

Press ENTER when ready.



Can you tell me where i can get this driver, and fix this problem?

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum MOderator

[Prem Selvam Arumugam]

Download from the below link

http://downloadmirror.intel.com/14506/eng/LSI_MPT_Windows_v.1.25.05.00_WHQL.zip

Hope using Non HP USB Floppy Drive.

Always stick with HP or IBM Disk with proliant server and also use the USB Ports on rear of the Server.

Ensure you don't remove either the Floppy Disk are the Drive on whole before your installation ends.

[Eduardo Ares]

I had the same problem, installing w2003 on ML 150 G5 with a floppy iomega.
The solution is add this lines in this file (textsetup.oem )to the bottom of

id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega

Good luck..