HP Proliant DL320e Gen8 v2 1785-Drive Array Not Configured

[Awin]

Hello every one, im newbie here.

i  have HP Proliant DL320e Gen8 v2 and i try to install a windows server 2012 and while on the process where i have to choose where i will install the system suddenly i found out that the HDD or the drive is not showing, then i tried to reboot the system and i got an error message that tell "1785 Drive Array not configure"  can someone help me about this matter Thanks in Advance

would like request a step by step procedure since im newbie Thanks guys,

will appriciate your help.

[Suman_1978 · Accepted solution]

Hi,

You need to configure RAID before installing OS.

During POST press F10 and enter into Intelligent Provisioning, refer to these docs for more step-by-step information.

Working with Intelligent Provisioning Deployment Settings:

http://h20566.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c03651516

HP Intelligent Provisioning User Guide for HP ProLiant Gen8 Servers.  Page 44 for HP Smart Storage Administrator (HP SSA).

http://www.hp.com/ctg/Manual/c03182305

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

[Awin]

Thanks man i installed the server operating system thank you so much for your help.