ProLiant Servers (ML,DL,SL)
1745790 Members
4285 Online
108722 Solutions
New Discussion

HP Proliant DL380 G4 Server Firmware Update

 
MMarble
Occasional Contributor

HP Proliant DL380 G4 Server Firmware Update

We have an HP Proliant DL380 G4 Server that needs a firmware update on its Smart Array 6i storage controller. 

Following the documentation, I've downloaded the firmware update file cp009357, but it does not seem to be the

correct one.  I get the message:

 

“The software will not be installed on this system because the required hardware is not present in the system or the

software/firmware doesn't apply to this system.

 

There were no devices found that could be loaded with the Rom Image

 

Press 'Close' to exit Setup.”

 

Is there another file I should be downloading?

2 REPLIES 2
FM-ISS
Frequent Advisor

Re: HP Proliant DL380 G4 Server Firmware Update

Hello MMarble 

 

Do you have the Operation system version ?

Maybe are using the X86 or x64  . 

Or the firmware is newer than the last one installed and you should update from the last version .

 

Here is the revision history  

 

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=426678&swItemId=MTX_5ce6254771904e8982335ff710&swEnvOid=4024#tab-history .

 

 


I´m HPE Employee

Accept or Kudo


MMarble
Occasional Contributor

Re: HP Proliant DL380 G4 Server Firmware Update

Boy it took me a long time to get back to this!  The server is running WinServ08 32 bit.  The current firmware for the Smart Array 6i is 2.58.  Downloaded the available firmware update versions:

v2-84a-CP006627
v2-80b-CP006627
v2-80a-CP006627
v2-76a-CP007619
v2-74a-CP007374
v2-68-CP006627
v2-58b-CP006627

Tried each one starting with firmware version 2.58B.  All of the installations failed with the same message:

“The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.

 There were no devices found that could be loaded with the Rom Image

 Press 'Close' to exit Setup.”