ProLiant Servers (ML,DL,SL)
1748070 Members
5429 Online
108758 Solutions
New Discussion юеВ

Re: HP SUM "Failed to add baseline" No default baseline found.

 
tbs-hp
Occasional Visitor

HP SUM "Failed to add baseline" No default baseline found.

We have a DL380 G7 sever and before we commission it have decided to use the HP SUM

 

  • 6.0.1
  • 1 Nov 2013

to update the firmware etc.

 

However it always reports the following message under "Inventory of node" and then hangs:

 

loccalhost   Failed to add baseline         No default baseline found.

 

How do fix this or can I get access to the prior release of HP SUM?

 

 

 

49 REPLIES 49
Torsten.
Acclaimed Contributor

Re: HP SUM "Failed to add baseline" No default baseline found.

This should be fixed in this version.

 

Please run clear-cache.bat (Windows) or clear-cache.sh (Linux) found in the same directory as HP SUM to clear the cache.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dcloes
New Member

Re: HP SUM "Failed to add baseline" No default baseline found.

Your suggested course of action does NOT work.

 

Guess it's going to be a long manual day.  Brand new Gen8 out of the box.  HP FAIL.

Torsten.
Acclaimed Contributor

Re: HP SUM "Failed to add baseline" No default baseline found.

Did you add a baseline before? Consider to use SPP 2013.09.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dcloes
New Member

Re: HP SUM "Failed to add baseline" No default baseline found.

I downloaded psp-9.10.w2k8r2.x64.exe after manually downloading the NIC drivers.
Torsten.
Acclaimed Contributor

Re: HP SUM "Failed to add baseline" No default baseline found.

i would use the current SPP as a baseline. Please try this or use SUM from this SPP.

sent from my mobile


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dcloes
New Member

Re: HP SUM "Failed to add baseline" No default baseline found.

 Downloading it now.  Thanks for help.

MAQTORO
Occasional Visitor

Re: HP SUM "Failed to add baseline" No default baseline found.

I also have this problem but I am trying to use it in Offline mode (booting from the ISO).  I don't see how I can attempt any of the recommended corrective actions :(

Torsten.
Acclaimed Contributor

Re: HP SUM "Failed to add baseline" No default baseline found.

The HP SUM 6.0.x download is just HP SUM - no firmware files at all.

 

You need to add them manually or just use SPP 2013.09.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
j0nezn
Occasional Visitor

Re: HP SUM "Failed to add baseline" No default baseline found.

The direction state that you supposed to be able to 

a. Select the location type Download from HP.
b. Click Browse and use the menu to navigate to the
directory where you want to save the custom
baseline.
c. Enter the URI for the proxy server. (Only required if
you chose to use proxy server.)
d. Enter the username. (Only required if you chose to
use proxy server.)
e. Enter the password. (Only required if you chose to
use proxy server.)
f. Click Done.

I cannot see where this is available in 6