MAC addresses on HP NC375T PCIe 4Pt Gigabit Server Adptr in DL580

[ironmantom]

I have a brand new DL580 G7 server and I would like to see the MAC addresses on each port on the 4 Port NIC (NC375T) in PCIe slot 7, but I cannot find out where I can do this at. I need to set it before I install the OS.

 How do you find the MAC address for each port on a NIC card plugged into one of the PCI slots? I have found in the BIOS all the MAC addresses for the onboard ports, but am struggling to find the MAC addresses on the NIC and not seeing anything useful during post for a menu to view

Thanks in Advance!!

[Johan Guldmyr]

Well there is some kind of PXE boot in the POST - maybe through that?
How about via the HP SmartStart CD? Maybe if you boot on that it will load drivers etc for the card and you might be able to get some kind of system information?
Or I guess any liveCD that supports the card should be able to tell you.

[ironmantom]

Thanks!

Smart Start CD did the trick!!!

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=345557&prodNameId=344318&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-f8f17683a6f84310b0f53718ed