ML350 G5 - Windows Doesn't Detect HDDs

[BamBamm]

I just got this server, fired it up and no HDDs detected. 

I checked and there are two HDDs. I slapped Windows 7 CD in and rebooted.

As Windows Installer loaded, it stated that no hdds could be found and instalation was aborted. 

I tired 3 times, switched maintenance switch number 6 on, loaded defaults in BiOS, and still nothing.

I also switched the HDDs out for working drives from another ML350.  Still same error... 

Any ideas? 

[BamBamm]

Option Rom Configuration for Arrays, version 8.20.01.00
Copyright 2008 Hewlett-Packard Development Company, L.P.
Controller: HP Smart Array E200i, slot 0

Direct-Attached Storage

"An invalid drive movement was reporterd during POST. Modifications to the array configuration following an invalid drive movemnet will result in loss of old configuration information and contents of the original logical drives.

Press <ESC> for the main menu."

[BamBamm · Accepted solution]

I pressed <ESC> and I created a logical disk and now it seems to be working...