ProLiant Servers (ML,DL,SL)
1748244 Members
3914 Online
108760 Solutions
New Discussion юеВ

Re: ML350 Server Won't boot to OS

 
Ric_r2cs
Advisor

Re: ML350 Server Won't boot to OS

ADU Report attached.

Ric_r2cs
Advisor

Re: ML350 Server Won't boot to OS

Ok, I have created the USB drive and downloaded the firmware from HP.

 

When I try to boot from the USB I get the image attached.

 

I have also written the ISO to a DVD and can get into the HP Software Update Manager but the firmware needed isn't on the disk

Torsten.
Acclaimed Contributor

Re: ML350 Server Won't boot to OS

I think the information was anywhere in this thread, but I miss it now.

 

What generation is your server?

 

Do you see something like "G5" on the chassis front?

 

 

 

Did you use the utility for creating the USB thumb drive?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ric_r2cs
Advisor

Re: ML350 Server Won't boot to OS

The server is ML350 G5

 

I have now created a DVD with the firmware on as well and successfully booted to it

 

It has detected version 1.86(b) and appears to of installed it but still not change

Torsten.
Acclaimed Contributor

Re: ML350 Server Won't boot to OS

IMHO your last chance is to re-arrange the disks, so power off, rearrange, power on. The goal is to find the original positions.
Not sure if this will work, since we don't know what happens to the disks in the other server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!