No Windows Server 2008 Drivers for ML310 G5 SATA RAID

[Giorgio Agrifoglio]

I'm installing WS2008 with sata raid 1 configuration.
In the HP support section i've downloaded WS2003 drivers (HP Embedded G5 SATA RAID Controller Driver for Windows Server 2003 1.4.17010.0 ) because there is no specific driver for WS2008.
While during WS2008 installation when I specify a driver from a USB-attached disk the array is recognized,at the first reboot the system strarts loading the os and then it crashes.
If i disable sata raid from BIOS WS2008 starts up normally.

P.S. This thread has been moved from Archived Desktops and Workstations Boards > Windows based to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

[JR Villalobos]

If you look at the server specifications, you can see that the controller of this server it's an HP SC40Ge SAS Host Bus Adapter with RAID, and support raid 0 & 1. Know looking at the HP website There are no drivers updated for windows 2008. I look at the 2003 drivers and try to see if there was any diff, I was able to install the drivers fo the controller and install the OS. Here it's the link for the drivers! I hope it works for you!!!!!

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580655&prodNameId=3580656&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-fbddb54c93334c36a218a051c7

[Giorgio Agrifoglio]

Thank You very much! I had aready solved this problem with Hpsupport who sent me those drivers by email.
Now i also have a web address for downloading them!

[JR Villalobos]

That's great!!! have a good day!