ProLiant Servers (ML,DL,SL)
1748240 Members
3820 Online
108759 Solutions
New Discussion юеВ

SA P410/256 BBWC cable PN

 
Paolo Cravero
New Member

SA P410/256 BBWC cable PN

I own a Smart Array P410 with the stock 256 MB memory module (pn 462974-001).

Then bought the BBWC upgrade but someone used the wrong code so I got only the battery.

So I ordered the cable only, that would connect my 256 MB module to the battery. I had surfed the HP documentation and found the pn 417836-B21 being the required cable.

The cable arrived and has the WRONG CONNECTOR (see the attached picture, if it gets posted). The box has the 417836-B21 number on it, but the cable is marked pn 408658-002 spare 409125-001. The box makes no mention to these latter two codes.

I have browsed through the P400/P410 documentation again and drawings show memory modules with either connectors, but spare parts lists do not mention (anymore?) the cable PN.

My questions: did I order the right cable but got the wrong one? What would be the right PN to connect the 256 MB to the battery?

Thanks.
Paolo
3 REPLIES 3
Miroslav Kos
Advisor

Re: SA P410/256 BBWC cable PN

This are correct spare parts:

Smart Array P400 Controller battery cable assembly, 11.5 inch4 409124-001

Smart Array P400 Controller battery cable assembly, 24 inch4 409125-001
Paolo Cravero
New Member

Re: SA P410/256 BBWC cable PN

Thank you Miroslav, 409125-001 is what I got(*) but the connector doesn't match the one on the 256MB module I have (see the attached picture).

What would be the spare number with the 15-pin in-line connector then?

Thank You.


(*) cable label says:
HP
PN:408658-002 SPARE:409125-001
Rev C M/D 19/09
TMaffessoni
Occasional Visitor

Re: SA P410/256 BBWC cable PN

The new correct part is 488138-001, in case you need again.