ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download??

SOLVED
Go to Solution
Occasional Contributor

SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download??

[ Edited ]

I see from this file, version 1.7.0.0 is required to put SPP on a bootable USB thumb drive. Searching only comes up with version 1.6.0.0. Where can version 1.7.0.0 be downloaded from?  Version 1.6.0.0 does not work to create the bootable USB for SPP. I did see a post that suggested putting the SPP to DVD then run the USB Key Creator Utility, I'd like to skip that step.

 

Thanks,

Dan Foxley

 

 

 ftp://15.217.49.75/ftp2/pub/softlib2/software1/doc/p2028536279/v74552/Readme.txt

 

Installing from a USB key 
-------------------------
Complete the following steps to flash the HDD firmware using a USB Key:

1.Download the ISO image of the SPP 20xx.xx.x (Where xx.xx.x is the latest version of the SPP) 
on a temporary directory from HP.com. 

2.Download the HP USB Key Creator Utility Version 1.7.0.0 or later on a temporary directory.
(HP USB Key Creator Utility is available on the HP Support & Drivers web site on HP.com) 

3.Run the HP USB key Creator Utility to create the USB key with the SPP . 

4.Boot from the newly created USB key. 
5 REPLIES
HPE Pro

Re: SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download??

Hi,

 

 Please find the link to download the HP USB Key Creator Utility Version 1.7.0.0

 
 
 
Was the post useful? Click on the white KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

Thank you,
Was the post useful? Click on the white KUDOS! Star.
For HP Guided Troubleshooting; www.hp.com/support/hpgt
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214
Occasional Contributor

Re: SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download??

I guess the referencing TXT file is incorrect about version 1.7.0.0 of the HP USB Key Utility being able to create a bootable USB drive. After installing version 1.7.0.0 of the HP USB Key Utility I'm still getting an error:

 

This CD/DVD does no support USB Key creation from an ISO file. Please use physical CD/DVD media to create the USB Key.

 

Any hopes for an updated HP USB Key Utility that will do this directly?

 

Thanks,

Dan

HPE Pro

Re: SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download??

I'm not seeing your error message. With v1.6 I was able to select the SPP .iso image and transfer it to a key




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor

Re: SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download?? | SOLVED

Jimmy,

 

Thanks for the sanity check. After further troubleshooting, uninstall, reinstall, mount the ISO etc....I thought to re-download - where I see:

 

These are SPP non-bootable subsets which support current DL, ML, and SL platforms, for the OSes specified. 

 

I'm a chucklehead, I didn't notice that the Windows only is NON- Bootable. I need to download the 1.5 Gig file, I was thinking I could just get the 537 MB Windows only, originally.

 

Dan

Highlighted
HPE Pro

Re: SPP Requires HP USB Key Creator Utility Version 1.7.0.0 - Download?? | SOLVED

Glad you got it working. I myself hadn't noticed the subset versions were not bootable




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!