ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

[Smart Array Controler]E200 - POST Error 1794

Visitor

[Smart Array Controler]E200 - POST Error 1794

Hi all,

 

I've a HP Proliant ML310 G4 and Smart Array Controler E200. I've a POST Error 1794. So,  I've replaced the module cache with battery, 2 times ,and upgrade the firmware with the last version 1.86 but same error "battery failed".  

Then,I don't know what to do, can you help me plz?

 

PS : Sorry for my bad english.

7 REPLIES
HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

1794-Drive Array - Array Accelerator Battery Charge Low...
...Array Accelerator is temporarily disabled.
Array Accelerator will be re-enabled when battery reaches full charge.
Audible Beeps: None
Possible Cause: The battery charge is below 75 percent. Posted writes are disabled.
Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours.

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

Thanks for your reply

 

the array accelerator and the cache module are the same, right?

If this is the case, i replaced the array accelerator/cache module with battery 2 times because the first time, i 'd still the same error and i thought the module or the battery cover were defective. So, i still have the same error after the second replacement.

 

Thx

HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

Please send me an ADU report

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

Thx for your reply

 

How to generate ADU report? it need a reboot, no?

HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

-All programs ==> HP System Tools ==> HP Array Configuration Utility  

 

 

 

Diagnostics ==> Generate Diagnostic Report

 

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

here is the report

it is on HP Array Diagnostic Utility

 

Thx

Highlighted
HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

First of All your server is out of date

Please update it using SPP :

http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx

 

after that send me new ADU :)

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details