replace of disks in RAID5

[alexkg]

On the DL380 G5 server the disk No. 8 in offline failed
The controler Smart Array P400, RAID5 from 8 disks, isn't present hot spare

I replaced a disk 8 on hot, I pulled out a disk and I inserted new without switching off the server
I passed rebuild the massif successfully
In Array Configuration Utility of mistakes any isn't present, the status at all OK
In diagnostics of HP System Management shows an error of reading/record on this disk

why? what I did wrong?

is possible to fix this error? 

[TVVJ]

You may try updating the firmware of the firmware. You may download the firmware from the following link:

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3288134&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9ed665a89aba447d925937f38b%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vig...

Regards,

Vijayasarathy

[alexkg]

I made updating the firmware of the firmware

and no fix this error on the new disk .... 

is possible to fix this error?

[TVVJ]

Please generate the Array Diagnostics Utility (ADU) report on the server and contact HP Support for hard drive replacement.

Regards,

Vijayasarathy

[alexkg]

Array Diagnostics Utility (ADU) report on the attachment