there are no configurable physical drives attached to the current array controller

[MarkoCupic]

Hi

Yesterday I just bought a new proLiant DL380 G9 Server and 2x SAS 300GB 10K (SN: 653955).

When I run the Array Configuration Utility, I get the following message:

"There are no configurable physical drives attached to the current array controller"

Does anybody has the same behavior?

Greetz Marko

[cykVM]

I would first check if the drives are attached to the RAID controller or probabyl are connected to the onboard (non-RAID) controller. Secondly I would run the latest SPP to update firmware/BIOS of the server (if not already done).

[Jimmy Vance]

What is the product ID (part number) of the server you ordered. If the server is an entry level model it has an embedded B140i which only supports SATA drives.