4 beep tones on my Netserver - HELP!

[cdrom_1]

Hi,

i've got an Netserver LXr PRO 6/200.
I have one Pentium PRO 200MHz (512KB Cache) installed and i installed a second.
Now i get four beep tones when i switch on the server.

What's wrong?

[CA660377 · Accepted solution]

http://netserver.hp.com/support/parts_service/beep_codes/beep_codes_tpl.asp?pid=lxrpro

Do you get any kind of video? I would try clearing the cmos again, or unplugging the system for 5 minutes, see if that helps.

[cdrom_1]

no, i don't get any kind of video.
But i will try that.
Is there any Jumper i have
to set for the second CPU?

[cdrom_1]

Yippy, the Server boots and found the second CPU!
But Windows 2000 didn't find it.
Do i have to install Windows 2000 Server new, or what else can i do?

[CA793665]

Your server's HAL may need updating. Check out this Microsoft link titled "How to Add Support for Multiple Processors in Windows 2000 (Q234558)"

http://support.microsoft.com/search/preview.aspx?scid=kb;en-us;Q234558

Hope this helps!