Cannot identify LXr Pro EISA Card

[Thomas Schmidt_3]

Hello, i have bought a LXr Pro Netserver. Inside this Server is an EISA Card with the Part-No. D2967-68001. But I cannot find any documentation or driver / config file for this card. Can anyone help me ??

Best regards
Tom

[meloni · Accepted solution]

hi

d2967b is a Eisa Remote assistant card

bye
marino

[Thomas Schmidt_3]

Thanks for your reply !
Do you know where I can get the EISA Config File or some information about this card ?

Thanks
Tom

[CA660377]

Are you using the latest BIOS and ECU? The ECU should have the most common cfg files available on it. Here is the link to the lxr pro:

http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix50463.html

[Thomas Schmidt_3]

Hello,
yes I use the newest ECU Disk and I have the newest BIOS installed. But the ECU show me that it have no CFG-File for this card. What can I do?

Thanks
Tom

[CA660377]

Try this file. It contains all the cfg files for all HP products. Download exe file, and run, it will prompt you for a floppy diskette.

[Thomas Schmidt_3]

Thank you for this file, but it seems to be damaged. Would you send this file again ?

Many thanks
Tom

[CA660377]

How about giving me an email address where I can send the file. I can rename it to .ex_ if your mail server rejects .exe files.

[Thomas Schmidt_3]

My EMail adress is Kairo-Robotik@T-Online.de. I can download the file but if I execute it I get a WinZip Archive failure.

Thanks
Tom

[meloni]

hi
have a look,
there is the indication that can help you

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xcf6a7bb04b5cd611abdb0090277a778c,00.html

bye

marino