HP Proliant Microserver & Vsphere

[eavanzi]

Hi everyone,

 I hope this is the right place to talk about my issue.

I'm trying to installa VMware Vsphere 6.0 on a Prolian microserver Gen 8 (Xeon Cpu) as Hypervisor operating system.

I downloaded the HP iso customized image and I use the intelligent provisioning wizard of HP via usb.

Name: VMware-ESXi-6.0.0-2494585-HP-600.9.3.30.2-Jun2015.iso
Release Date: 2015-07-15
Build Number: 2494585-600.9.3.30.2

I see the iso file but it seems that it's not recognized as valid image because there is no way to proceed with the installation. I guess double click has to be done but does not work.

Thanks in advance

[Jimmy Vance]

You need to burn the ISO to media or use the Virtual Media function of iLO to mount the ISO image, just copying the ISO to a USB stick will not work

[eavanzi]

Hi Jimmy, finally I burned the iso as bootable but there was no way to proceed through intelligent provisioning.

Then I did the boot from the usb directly.

Thanks