ProLiant Servers - Netservers
1748112 Members
3523 Online
108758 Solutions
New Discussion юеВ

Re: MicroServer Gen8 is noisy

 
SOLVED
Go to solution
Erathiel
Frequent Advisor

Re: MicroServer Gen8 is noisy

Oscar, this is great news, thank you!

I am stuck with the very same problem on a sligtly different horse, however, as my hardware is a ProLiant DL320e Gen8 v2. The ROM you've posted here is for the MicroServer family and what I'd like to know is whether the fix is going to be released for the DL family as well.

subsix
Frequent Advisor

Re: MicroServer Gen8 is noisy

I can confirm that Zak's method of installing the ROM works on Mac OS X too...

 

FYI: In my initial tests today and for my setup the new ROM lowers fan speed to 14% (server sitting in a moderately warm office room without A/C). With the oder ROM I was unable to get the same config to levels below 21%...

 

Peter

Telmah
Occasional Advisor

Re: MicroServer Gen8 is noisy

with new firmware iLo reports 12% fan speed... much better... !!! thx! ... next target - 6 - 8% like a RAID mode reports :)

ZakSmith
Advisor

Re: MicroServer Gen8 is noisy

BTW, ILO 1.50 can also be installed. 

Telmah
Occasional Advisor

Re: MicroServer Gen8 is noisy

On official site there is only 1.40 version of iLo

Oscar A. Perez
Honored Contributor

Re: MicroServer Gen8 is noisy

iLO4 v1.51 was released today.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
lsiemiradzki
Occasional Visitor

Re: MicroServer Gen8 is noisy

Can you provide the link, please? I still see 1.40.

Thanks.

 

subsix
Frequent Advisor

Re: MicroServer Gen8 is noisy

der_burner
Advisor

Re: MicroServer Gen8 is noisy

I have installed J06 and iLO 1.51 but my fan is after a short time on 31% resumed by 40%. Nothing help. This Box wouldn't be quiet.

 

What do you do to get the fan on 15%?

Jimmy Vance
HPE Pro

Re: MicroServer Gen8 is noisy


@der_burner wrote:

I have installed J06 and iLO 1.51 but my fan is after a short time on 31% resumed by 40%. Nothing help. This Box wouldn't be quiet.

 What do you do to get the fan on 15%?


J06 is the ROM family, that will never change. What is the ROM date, it should show as 06/06/2014.

 

I've installed 06/06/14 ROM on 5 systems and they all are running between 13 and 17 percent.

 

They have various versions of iLO, I just upgraded one to 1.51 and it still shows 13%

 

 

No support by private messages. Please ask the forum!