NetServer LH II BIOS Upgrade

[CA784260]

I can find the upgrade files but cannot seem to locate any instructions. Are there instructions for upgrading the BIOS?

Thank Scott

[meloni]

hi
just download the autoexpanding file from HP site,
this will create you a bootable floppy ( I sugget you to perform a full format cbefore to use the floppy to avoid reading problem)
then you boot from this floppy and the process will be performed automaticaly.

may be some files.txt are on the floppy

bye
marino

[CA784260]

OK Thanks, Does anything have to be done with the ECU (EISA Configuration Utility)?

[meloni]

Hi
ECU (Eisa Configuration Utility) is the tool you need to enter in the bios to see or change the configuration. In this kind of server, you cannot have access to the bios pusshing on F2 at boot time but you need this tool.

bye

marino

[CA784260]

Thanks, So to access the BIOS would you have to have the ECU disk in the floppy drive during boot up and then select F2?

[CA660377 · Accepted solution]

No, the system will boot to the diskette, just like it would any other bootable floppy.