ProLiant Servers - Netservers
1748139 Members
4174 Online
108758 Solutions
New Discussion юеВ

Re: Reboot ILO with hponcfg

 
SOLVED
Go to solution
trevrobwhite
Occasional Contributor

Reboot ILO with hponcfg

Hi all,

I'm hoping someone can help, i've configured my ILO user/password + IP address using hponcfg (included below details for the board), however to activate the new IP address I know I need to reboot the ILO processor, does anyone know the RIBCL to reboot the ILO processor only, the only commands I can find reset the processor which completely wipes it which is not what I want, I want the new IP address activiated.

 

Many thanks.

 

Here are the scripts you can give to hponcfg with the /f switch to change the password and IP address:

 

Change Administrator or User password

<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="administrator" PASSWORD="XXXX">
  <RIB_INFO MODE="write">
    <RESET_RIB/>
  </RIB_INFO>
  </LOGIN>
</RIBCL>

Replace administrator with another user if needed, and XXXX with the password you want to use

Change IP Address details:

<RIBCL VERSION="2.1">
    <LOGIN USER_LOGIN=тАЭuserтАЭ PASSWORD=тАЭpasswordтАЭ>
        <RIB_INFO MODE=тАЭWRITEтАЭ >
            <MOD_NETWORK_SETTINGS>
                <IP_ADDRESS VALUE = "0.0.0.0"/>
                <SUBNET_MASK VALUE = "255.255.255.0"/>
                <GATEWAY_IP_ADDRESS VALUE = "0.0.0.0"/>
                <PRIM_DNS_SERVER value = "0.0.0.0"/>
                <SEC_DNS_SERVER value = "0.0.0.0"/>
                <DHCP_ENABLE VALUE = "N"/>
                <DNS_NAME VALUE = "ILO"/>
                <DOMAIN_NAME VALUE = ""/>
                <TER_DNS_SERVER value = "0.0.0.0"/>
                <PRIM_WINS_SERVER value = "0.0.0.0"/>
                <SEC_WINS_SERVER value = "0.0.0.0"/>
                <STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
                <STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
                <STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
            </MOD_NETWORK_SETTINGS>
        </RIB_INFO>
    </LOGIN>
</RIBCL>

Change details as needed

2 REPLIES 2
Jimmy Vance
HPE Pro
Solution

Re: Reboot ILO with hponcfg

 

 

<!--         RIBCL Sample Script for HP Lights-Out Products          -->
<!--Copyright (c) 2013 Hewlett-Packard Development Company, L.P.     -->

 

<!-- Description:  This is a sample XML script to reset (reboot) the -->
<!--               following devices:                                -->
<!--                 Integrated Lights-Out 4 (iLO 4)                 -->
<!--                 Integrated Lights-Out 3 (iLO 3)                 -->
<!--                 Integrated Lights-Out 2 (iLO 2)                 -->

 

<!-- NOTE:  You will need to replace the USER_LOGIN and PASSWORD     -->
<!--        values with values that are appropriate for your         -->
<!--        environment.                                             -->

 

<!--        All active connections (including Remote Console and     -->
<!--        Virtual Media sessions) to the Lights-Out device will be -->
<!--        dropped immediately when this script executes.           -->

 

<!--        Use CPQLOCFG.EXE ver 4.00 or greater, or HPQLOCFG.EXE    -->
<!--        ver 1.00 or greater with this script.                    -->

<!--        This script was written for iLO 4 firmware version 1.01  -->
<!--        release.                                                 -->

 

<!--        See "HP Integrated Lights-Out Management Processor       -->
<!--        Scripting and Command Line Resource Guide" for more      -->
<!--        information on scripting and the syntax of the RIBCL     -->
<!--        XML.                                                     -->

 

<!--        Firmware support information for this script:            -->
<!--            iLO 4 - All versions.                                -->
<!--            iLO 3 - All versions.                                -->
<!--            iLO 2 - All versions.                                -->

 

 

<RIBCL VERSION="2.0">
   <LOGIN USER_LOGIN="adminname" PASSWORD="password">
      <RIB_INFO MODE="write">
         <RESET_RIB/>
      </RIB_INFO>
   </LOGIN>
</RIBCL>

 

 

No support by private messages. Please ask the forum! 
trevrobwhite
Occasional Contributor

Re: Reboot ILO with hponcfg

Many thanks.