Quality Center Support and News
Showing results for 
Search instead for 
Do you mean 

HP Quality Center 11 and HP Operations Orchestration v9.07 integration

SOLVED
Go to Solution
Occasional Advisor

HP Quality Center 11 and HP Operations Orchestration v9.07 integration

Hello erverybody,

 

please, can anybody provide me information (docs et. al.)
about how to do the integration of HP's Quality Center (version 11) with HP's
Operations Orchestration? Is there any further package needed like the ccrm
package used for the integration of HP SM with HP OO? My intention is to get
test cases from the QC via a HP OO Flow and set test results within QC by using
OO Flows. Also, I want to trigger automated tests within QC via OO Flow(s).

Thanks a lot!

Regards, Till

#[HP Operations Orchestration] #[HP Quality
Center]
#Integration #[OO Flows] #Test #[HP OO v9.07] #[HP QC v11] #[HP QC 11]

1 ACCEPTED SOLUTIONS
Highlighted
HPE Expert

Re: HP Quality Center 11 and HP Operations Orchestration v9.07 integration

Hi,

Please check the HP OO-ALM Integration Guide: https://hpln.hp.com//system/files/HP_OO_CP9_ALM_Integration_Guide.pdf

You would need to have an HP passport to access the document. It contains all the needed information about integrating OO with ALM.

Thanks,

Hristo

HPE ALM Support Engineer
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
2 REPLIES
Established Member

Re: HP Quality Center 11 and HP Operations Orchestration v9.07 integration

hi all,

 

any update on this request, i have a simular use case and would like to know if possible

 

br

q

Highlighted
HPE Expert

Re: HP Quality Center 11 and HP Operations Orchestration v9.07 integration

Hi,

Please check the HP OO-ALM Integration Guide: https://hpln.hp.com//system/files/HP_OO_CP9_ALM_Integration_Guide.pdf

You would need to have an HP passport to access the document. It contains all the needed information about integrating OO with ALM.

Thanks,

Hristo

HPE ALM Support Engineer
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.