Showing results for 
Search instead for 
Do you mean 

ISEE port

Occasional Advisor

ISEE port

hi,
which ports are used by ISEE client and server SPOP?
We have several clients configures on DMZ network
Can I use alternative ports, instead default ports?

thanks a lot!
Luca
4 REPLIES
Honored Contributor

Re: ISEE port

Hi,

ISEE Clients send data to the SPOP (or directly to HP) using port 80, this is http protocol and cannot be changed.

The SPOP (if you have one) sends data to HP over port 443, this is https standard protocol and once again, this cannot be changed.

So, if you have Clients in a DMZ, you'll need to open port 80 (outbound with established back) to the SPOP.

There are other "optional" applications such as UDN, telnet, ftp, SMTP which may require additional ports. Please refer to the SPOP Install & Upgrade Guide for more info.

Hope this helps,

Regards,
Occasional Advisor

Re: ISEE port

Since we cannot open port 80 (for security reason), than we cannot install ISEE client on server in DMZ.
Is it correct?

thanks
Luca
Honored Contributor

Re: ISEE port


That's correct. ISEE Clients must be able to send incidents to the Server (either SPOP or HP Backend) through port 80.

Regards,
Highlighted
Super Advisor

Re: ISEE port

requires permission of entrance and exit or only of exit?