Networking
Find answers to your questions about Networking.
Security
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Good afternoon, I probably don't have the correct blog, so please feel free to point me in the proper direction for this post. Recently I have been fighting a problem with HPNA 10, where driver discovery using ssh does not discover Cisco Nexus Driver...
Posted to:
Original author:
We moved from 3Com to HP last year and have noticed this problem going on for a while. Any device pulling power from the switches are constantly showing the port to go offline then back online. This happens every 7-10 minutes, all day and night. Thou...
Posted to:
Original author:
I've got an HP 1810-24G where the pause frame counter continually increments whenever I connect my Zyxel 1123-NI access point. I've got two of these APs and it happens with both and is consistent when I change ports on the HP. Question 1: I mirrored...
Posted to:
Original author:
Hi Forums! When one of the four fibre cables of an MPO connection drops, does it impact the remaining connections? ie: 40G -> Split to 4x 10G. If 1x10G is cut do the other 3x10G drop? I read that the DACs can support each connection individually,...
Posted to:
Original author:
Hi guys! I have a problem with EVI. The thing is, I have configured it succesfully and hosts in the extended VLAN can excahnge traffic between datacenters. The problem is that switches don't learn mac-addresses of their neighbors in extended VLAN. Fo...
Posted to:
Original author:
Since TippingPoint was sold from HP to Trend Micro, is this forum still alive for new content? Seems Trend is hosting their Protect724 community on hpe.com, so it's more confusing. Thanks-- --- Cris
Posted to:
Original author:
Howdy, To the best of my knowledge, it depends :-) If the port is configured as 4 virtual 10Gb interfaces losing "pair 1" will not impact pairs 2-4. If the port is configured as one 40GbE interface utilising 8 cores of the MPO you need all...
Posted to:
Original author:
Joepske, Some time ago I configured simple QinQ topology based on the 5800 as my IRF and Procurve vlans transparent transporting. When I started, I used this info: http://datacenterfun.com/comware-configuring-qinq/ So, in my case int the middle I put...
Posted to:
Original author:
Hi Michal, In the current config, there's still no QinQ configuration active, because I'm stuck with this question. Next month we will migrate to the datacenter and the configuration has to work. For now I'm using an temporary HP E3500 switch to test...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
Aug 29 - Sep 1
Boston, MA
HPE Big Data Conference 2016
Attend HPE’s Big Data Conference on August 29 - September 1, 2016 to learn from peers in every industry and hear from Big Data experts and thought lea...
Read more
Sep 13-16
National Harbor, MD
HPE Protect 2016
Protect 2016 is our annual conference on September 13 - 16, 2016, and is the place to meet the world’s top information security talent, discuss new pr...
Read more
View all
Top Authors
Esteemed Contributor
33
View all