SG 11.20.22 RHEL 6.5 cmcheckconf error + Ora Tkit

[BenFisch]

hi i try to update our oracle env.

actual env:

Rhel 6.3

SG 11.20.10

Ora Tkit A05.01.01

after update:

RHEL 6.5

SG 11.20.22

Ora Tkit A05.01.12

update proccess or new installation works fine without any errors or warnings.

i can create/failover/start packages.

but if i do

/usr/local/cmcluster/bin/cmcheckconf -v -C /usr/local/cmcluster/conf/cmcluster.conf -p /usr/local/cmcluster/conf/pkg_ref_conf;

i´ve got many errors:

Begin cluster verification...
Checking cluster file: /usr/local/cmcluster/conf/cmcluster.conf.
MAX_CONFIGURED_PACKAGES configured to 300.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 300.
Gathering storage information
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Cluster clu-rbg01 is an existing cluster
Begin checking consistency of files mentioned in cmclfiles2check
/usr/local/cmcluster/conf/cmclfiles2check is the same across nodes lnx-rbg09 lnx-rbg10
/etc/nsswitch.conf is the same across nodes lnx-rbg09 lnx-rbg10
/etc/services is the same across nodes lnx-rbg09 lnx-rbg10
/usr/local/cmcluster/conf/cmknowncmds is the same across nodes lnx-rbg09 lnx-rbg10
/usr/local/cmcluster/conf/cmcluster.rc is the same across nodes lnx-rbg09 lnx-rbg10
All files were the same on all nodes
"-p" option specified. Opening package reference file: /usr/local/cmcluster/conf/pkg_ref_conf.
Validating package poct1rbg via /usr/local/cmcluster/conf/scripts/mscripts/master_control_script.sh ...
Waiting for up to 300 seconds for the validation.
On node lnx-rbg09, validation of package poct1rbg succeeded with:
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
.....
.....
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
PR_mode:DISABLED
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
.....
.....
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
Verifying if the IP addresses could be added to corresponding subnets
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 85: SG_LNX-RBG10_PID[0]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 91: SG_LNX-RBG09_PID[1]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 92: SG_LNX-RBG10_PID[1]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 98: SG_LNX-RBG09_PID[2]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
Install directory operation mode selected.
Oracle Toolkit validation
The toolkit configuration file in the toolkit configuration directory will be backed up and a new file will be created when the package configuration is applied.
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
.....
.....
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
PR_mode:DISABLED
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
......
......
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
Verifying if the IP addresses could be added to corresponding subnets
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 85: SG_LNX-RBG10_PID[0]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 91: SG_LNX-RBG09_PID[1]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 92: SG_LNX-RBG10_PID[1]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 98: SG_LNX-RBG09_PID[2]=: command not found
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
Install directory operation mode selected.
Oracle Toolkit validation
The toolkit configuration file in the toolkit configuration directory will be backed up and a new file will be created when the package configuration is applied.
/var/tmp/master_control_script_env.poct1rbg.708031: line 84: SG_LNX-RBG09_PID[0]=: command not found
.....
.....
/var/tmp/master_control_script_env.poct1rbg.708031: line 99: SG_LNX-RBG10_PID[2]=: command not found
Validation for package poct1rbg succeeded via /usr/local/cmcluster/conf/scripts/mscripts/master_control_script.sh.
Validation for package poct5rbg succeeded via /usr/local/cmcluster/conf/scripts/mscripts/master_control_script.sh.
Maximum configured packages parameter is 300.
Modifying configuration on node lnx-rbg09
Modifying configuration on node lnx-rbg10
Modifying the cluster configuration for cluster clu-rbg01
Modifying the package configuration for package poct1rbg.
Modifying the package configuration for package poct5rbg.
Use the cmapplyconf command to apply the configuration.

Can anybody help me or have the same situation?

[BenFisch · Accepted solution]

HP found the solution.

It´s a bug in SG 11.20.22 which cannot handle hostnames with "-" in it.

A new Patch will be released soon. 

[Paul Meserole]

This still appears to be a problem in SG 12.00.  When will it be fixed?  Is there any manual workaround?