352 FC Switch

[Joseph Callen]

Hopefully someone can help me. I just purchased on eBay a 352 FC Switch for a project at home. I don't know what the password is. I tried what I think is the default password of 'password', but of course that doesn't work. Does anyone know the procedure to reset the password? Thanks.

30-10010-02, REV. A2
372282-001
Serial: MY20537960

System Name : Model 352 FC Switch
Location :
Contact : HP Field Service
MAC ID : 00 10 9b 05 43 62
Serial Number : Z46S6116863
Switching Mode : on
OS Error Threshold : 16777215
CRC Error Threshold : 3
Blocking Arbitration: xFF
Switch FW Version : 2.07 (build 12)
SOC Version : 2
Switch HW Version : 3
MIB Version : 1.2
Speed : twoGig
Fault Status : ok
SOC Status : ok
Current Time : 06/25/2009 21:50:18
System Up Time : 0 Days 00:31:17
IP Address : 192.168.1.129
Netmask : 255.255.255.0
Default Gateway : 192.168.1.1

[michael mateo]

Hello there, It seems that We are having the same issue. I notice that you didn't recieve a response, is that due to being a very difficult pronblem? We have a very tight team that has over come many obsticale, but thisa password protected 352 fc switch has stumped us over and over. CAn any one please help>>>>>

[Joseph Callen]

I am currently still using this switch, it just has the one zone which for me is OK. I really wanted learn zoning. I did read somewhere that there maybe a security vulnerability with the webserver that the switch runs so you maybe able to exploit that since no one can help. I even tried to contact Emulex that actually manufactures the switch - no luck with them either, they said to call Apple :)

[Mazzif]

serrious necro post here, but I had the same issue as the others here.  My Solution:

log in using any password to be a guest

at the root promt type lib and press Enter

using the code that is displayed in the console promt, find your match in the table below and enter that code:

Number provided by the "lib" command Temporary password
141180 298138-184768
141181 193983-839183
141182 391878-183948
141183 457829-926274
141184 301983-729402
141185 928718-001918
141186 672817-339201
141187 338918-220022
141188 112394-991023
141189 392093-001938
141190 120939-102393
141191 193049-991039
141192 310833-110110
141193 238961-018933
141194 718928-019381
141195 232389-991039
141196 891083-139918
141197 189368-018998
141198 286136-189996
141199 489183-193791
141200 548918-001937
141201 386189-183087
141202 189837-198083
141203 231338-366111
141204 689183-813331
141205 891733-112228
141206 346555-157762
141207 222687-888713
141208 718936-186688
141209 133265-337612

Starting Application
Please Wait...
Enter Password
*************
Invalid Password, logging in as visitor.

root Menu:
1. show - Go to show sub-menu.
2. ? - Help

OK

Next Press 3 and Press Enter to get to the Eng Menu

root>lib
141192>310833-110110

OK

(eng)root>3

eng Menu:
1. get - Get MIB data.
2. set - Set MIB data.
3. prttx - Control port transmitter.
4. snoop - Set port to snoop another.
5. esnoop - Set port to snoop another using enhanced snoop method.
6. dump - Dumps the register content for a feature.
7. lipprt - Lip Port
8. eecrc - Set the CRC
9. eestrk - Set Trunking configuration in EEPROM.
10. eegtrk - Get the Trunking Info from EEPROM
11. eewr - Write to EEPROM
12. eerd - Read from EEPROM
13. clrpass - Set passwords back to default.
14. eesync - Synchronize current settings with EEPROM.
15. files - Display the Flash files on the switch.
16. view - Display the content of a file.
17. clrffs - Clear the flash file system. Requires reboot to use again.
18. blk - Show block entries
19. wron - turn write debug on or off.
20. imode - Query the SOC interface mode.
21. sev - Configure event log severity filter level.
22. fault - Configure event log severity fault threshold.
23. teltime - Get and set the telnet timeout value.
24. except - View and clear CPU exception information
25. engfile - Get and set access to eng level file upload
26. mac - Configure the ethernet MAC address.
27. sn - Configure the unit serial number.
28. tftp - Load new config files using TFTP.
29. .. - Go back
30. ? - Help
(eng)root/eng>

From here you can issue clrpass or clrffs  commands t clear password and flash 

From here press .. and Press Enter to go back a menu

Press 1 and Press Enter to go into Config mneu

(eng)root>1

config Menu:
1. save - Save current system configuration.
2. sys - Go to the system configuration sub-menu.
3. default - Set to factory default.
4. port - Go to port configuration sub-menu.
5. password - Change administrative password.
6. load - Go to load balancing configuration sub-menu.
7. trunk - Go to trunking configuration sub-menu.
8. network - Go to network configuration sub-menu.
9. zone - Go to zone configuration sub-menu.
10. .. - Go back
11. ? - Help
(eng)root/config>

Option 5 to reset Password still asks for current password, so Im guessing 'password" is not the default, but...we can still config all paramiters of the switch I think...

Hope this helps someone

[Mazzif]

After a little more messing, I found the default password to be hpservice

Hope this helps someone else out there.