D2700 power supplies degraded ?

[kkpro]

Hello. New D2700 shows, that both power supplies are in "degraded" state. HP has a note, that this bug was resolved in 0146 fimware. Seems to be I have version 0147. And there are only 0146 versions of firmware on HP site. What to do ? downgrade ?

[Torsten.]

As far as I remember there was a problem with the firmware load utility, for this reason version 0147 is not available.
IIRC this version is still used in other environments (MSA, EVA).

Don't downgrade.

The question is, what is "degraded"?

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/advisoriesDisplay/?sp4ts.oid=3954787&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03883900-2%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

This was the fix:

The following items was fixed in firmware 0147
• Fixed an issue found during manufacturing testing where, after hot plugging an I/O module, the
enclosure fan speed did not return to the dual I/O module configuration fan speed.

The following items were added or fixed in firmware 0146:
• Fixed a reporting issue in which a power supply was incorrectly reported as failed by some
management utilities.
• Added speed negotiation to allow 6 Gb/s SATA drives to function at 3 Gb/s.

[tbarnespainmdco]

Have same issue.  So just to verify.  Solution is to leave as is?  put up with the degraded status?

[Lagerstars]

Same problem on a newly delivered unit here too. Also running 0147 firmware.

[kkpro]

I opened a case at HP and the answer was "wait for new firmware" :(

[kkpro]

Seems to be new firmware is available now for D2600/D2700: 0149 (B) (2 Apr 2014). Anyone already tried it ?

[kkpro · Accepted solution]

Well, updated p2000 with latest firmware and then D2700... Now seems to be OK.