Storage Area Networks (SAN) (Small and Medium Business)
Showing results for 
Search instead for 
Do you mean 

HP P2000 G3 MSA iSCSI multipath

Occasional Contributor

HP P2000 G3 MSA iSCSI multipath

Dear all,


i´ve the following question:


P2000 G3 iSCSI Dual Controller.

4 x iSCSI port on each controller = 8 iSCSI Targets

Is there any way to team / bond the nic´s  to get more performance like 4 M/bit.







Honored Contributor

Re: HP P2000 G3 MSA iSCSI multipath

Teaming & bonding isn't supported for iSCSI - it's not a HP or P2000 specific issue, it's a protocol issue, it's not recommended.

What you can do is utilize MPIO (Multi-Path Input/Output). MPIO is configured on the server side to define multiple paths for your server to reach the SAN by utilizing a combination of multiple NICs on the server and multiple ports on the SAN controllers (but it doesn't have to be a 1-to-1 ratio, you can have, for example, 2 NICs and 8 iSCSI SAN ports and define paths from each NIC to all 8 iSCSI SAN ports). I did a quick search on the internet to see if I could find a good explanation... and I actually found a very detailed blog post that explains and demonstrates using Windows Server 2012 and a P2000 iSCSI SAN.

Hope this helps!
David Schwartzstein
IT Channel Sales Expert / Solutions Architect

Currently looking for my next opportunity -

If my post solves your problem, please kindly take a moment to mark my post as a solution. Thank you.