1748170 Members
3896 Online
108758 Solutions
New Discussion

P2000 G3 MSA

 
cramires
Visitor

P2000 G3 MSA

Hi

I have a P2000 G3, One disk drive fails and we replace it, the storage recognizes the disk as a VDISK SP, I expected that the MSA will automatically re-join the disk as an active member of the RAID if this is how it was originally configured, but it didn't happen and the disk stays as spare of the vdisk. How can I re-joing the disk to the raid?

Thanks,

Carolina

2 REPLIES 2
Cali
Honored Contributor

Re: P2000 G3 MSA

I think you have had a Spare Disk before.

Than the Spare Disk goes in the Raid and replace the Failed Disk.

Now the new Disk become the new Spare Disk.

This is to avoid a second Rebuild of the Raid.

Is the Raid now OK and the new Disk is a Spare, than all is fine.

 

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
cramires
Visitor

Re: P2000 G3 MSA

Thanks.