Storage Area Networks (SAN) (Small and Medium Business)
Showing results for 
Search instead for 
Do you mean 

P2000 G3 SAS problem with a FRU

Occasional Visitor

P2000 G3 SAS problem with a FRU

Installed is 6 2TB disks. 

Overview says:

Health, component, Count, Capacity

Degradated, System, , 12.4TB

OK, Enclosures, 1, 12.4TB

OK, Disks, 6, 12.4TB

Degraded, Vdisks, 1, 10TB

, Volumes, 1, 10TB

 

In System event there are these logs:

A1408,59, Disk channel event. (channel: 0, ID: 6, SN: Z292FFB500009237424T, enclosure: 1, slot: 7): I/O Timeout  CDB:Rd 9bc4e400 0080

A1407,1, A vdisk is critical. (vdisk: vd01, SN: 00c0ff10d05d0000773fd64d00000000)

A1406,314, There is a problem with a FRU. (FRU type: disk, enclosure: 1, device ID: 6, vendor: SEAGAT, product ID: ST33000650SS    , SN: Z292FFB500009237424T, version: 0003, related event serial number: A1405, related event code: 8)

A1405,8, A disk that is part of a vdisk is down. (vdisk: vd01) (disk: channel: 0, ID: 6, SN: Z292FFB500009237424T, enclosure: 1, slot: 7)

A1404,59, Disk channel event. (channel: 1, ID: 6, SN: Z292FFB500009237424T, enclosure: 1, slot: 7): I/O Timeout  CDB:Rd 76ffe000 0080

A1403,59, Disk channel event. (channel: 0, ID: 6, SN: Z292FFB500009237424T, enclosure: 1, slot: 7): I/O Timeout  CDB:21 additional

 

Disk SN:Z292FFB500009237424T is in Enclosure overview marked as LEFTOVR and  healt ok. Rate is 3.0 and other disks has rate 6.0.

 

What you recommend? Change the disk?

There is other 2 disks available, which is not installed yet. This is because low free space on storage

1 REPLIES
Highlighted
Acclaimed Contributor Acclaimed Contributor

Re: P2000 G3 SAS problem with a FRU

disk in enclosure: 1, slot: 7 looks bad (timeouts!), consider to replace the disk and make it a spare!

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!