Storage Area Networks (SAN) (Small and Medium Business)
Showing results for 
Search instead for 
Do you mean 

Shutdown p2000 G3

SOLVED
Go to Solution
Highlighted
Occasional Contributor

Shutdown p2000 G3

Hi,

 

We need to move a p2000 G3 to a difrent location.

What is the proper way to shut down the P2000 G3?

1 ACCEPTED SOLUTIONS
Occasional Contributor

Re: Shutdown p2000 G3

Found it http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02520791/c02520791.pdf

 

 Perform
a shut down before removing a controller module or powering down the system.

 

To perform a shut down
1. In the Configuration View panel, right-click the local system and select Tools > Shut Down or Restart
Controller.
2. In the main panel, set the options:
• Select the Shut down operation.
• Select whether to restart the processor in controller A, B, or both.
3. Click Shut down now. A confirmation dialog appears.
4. Click Yes to continue; otherwise, click No. If you clicked Yes, a second confirmation dialog appears.
5. Click Yes to continue; otherwise, click No. If you clicked Yes, a message describes shutdown activity.

3 REPLIES
Occasional Contributor

Re: Shutdown p2000 G3

Found it http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02520791/c02520791.pdf

 

 Perform
a shut down before removing a controller module or powering down the system.

 

To perform a shut down
1. In the Configuration View panel, right-click the local system and select Tools > Shut Down or Restart
Controller.
2. In the main panel, set the options:
• Select the Shut down operation.
• Select whether to restart the processor in controller A, B, or both.
3. Click Shut down now. A confirmation dialog appears.
4. Click Yes to continue; otherwise, click No. If you clicked Yes, a second confirmation dialog appears.
5. Click Yes to continue; otherwise, click No. If you clicked Yes, a message describes shutdown activity.

Occasional Visitor

Re: Shutdown p2000 G3

Is it safe to shutdown remotly and let the power fail by itself in case of a planend power maintenance?

Acclaimed Contributor Acclaimed Contributor

Re: Shutdown p2000 G3

Shutdown both storage controllers, then pull the cables.

This is the only way - there is no power off switch or command.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!