MSA Storage
1748074 Members
5451 Online
108758 Solutions
New Discussion

Shutdown p2000 G3

 
SOLVED
Go to solution
gortex_78
Occasional Contributor

Shutdown p2000 G3

Hi,

 

We need to move a p2000 G3 to a difrent location.

What is the proper way to shut down the P2000 G3?

3 REPLIES 3
gortex_78
Occasional Contributor
Solution

Re: Shutdown p2000 G3

https://support.hpe.com/hpesc/public/docDisplay?docId=c05094827&docLocale=en_US,https://support.hpe.com/hpesc/public/docDisplay?docId=a00046816en_us&docLocale=en_US 

 

 Perform
a shut down before removing a controller module or powering down the system.

 

To perform a shut down
1. In the Configuration View panel, right-click the local system and select Tools > Shut Down or Restart
Controller.
2. In the main panel, set the options:
• Select the Shut down operation.
• Select whether to restart the processor in controller A, B, or both.
3. Click Shut down now. A confirmation dialog appears.
4. Click Yes to continue; otherwise, click No. If you clicked Yes, a second confirmation dialog appears.
5. Click Yes to continue; otherwise, click No. If you clicked Yes, a message describes shutdown activity.

UdiBurg
Occasional Visitor

Re: Shutdown p2000 G3

Is it safe to shutdown remotly and let the power fail by itself in case of a planend power maintenance?

Torsten.
Acclaimed Contributor

Re: Shutdown p2000 G3

Shutdown both storage controllers, then pull the cables.

This is the only way - there is no power off switch or command.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!