MSA Storage
1748169 Members
4297 Online
108758 Solutions
New Discussion юеВ

Re: Upgrading EVA4400 firmware & CommandView version

 
Domenic_Alvaro
Occasional Visitor

Re: Upgrading EVA4400 firmware & CommandView version

Wow! Thanks for the super-quick reply.
kmouline
New Member

Re: Upgrading EVA4400 firmware & CommandView version

Hello Dears,

 

 

The firmware and CV upgrade can have an incidence on the production storage system ?

 

Thank you,

Sapic
Occasional Advisor

Re: Upgrading EVA4400 firmware & CommandView version

Hello all,

 

I am new for this EVA4400..

At my place currently Command View version is 8.0..

How can i upgrade CV to version 9??

I am already search for version 9, but cant find any..

Anyone can help me plz???

tq..

Torsten.
Acclaimed Contributor

Re: Upgrading EVA4400 firmware & CommandView version

current version 10.2:

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.2


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sapic
Occasional Advisor

Re: Upgrading EVA4400 firmware & CommandView version

Thx 4 da replied..

But, actually im lookin 4 CV ver 9.. =(

Torsten.
Acclaimed Contributor

Re: Upgrading EVA4400 firmware & CommandView version

Why version 9?

Version 9.4 is here:
(last version for 3000/5000):

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sapic
Occasional Advisor

Re: Upgrading EVA4400 firmware & CommandView version

can ver8 upgrade straight away to ver10??

and is the link given compatible wit 4400??

torsten..

tq 4 u help sir..

i really appreciate..

 

Torsten.
Acclaimed Contributor

Re: Upgrading EVA4400 firmware & CommandView version

Uninstall commandview, reboot, install the new version.

Current firmware XCS 11001100 needs command view 10.2.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sapic
Occasional Advisor

Re: Upgrading EVA4400 firmware & CommandView version

Hye..

 

i successfully upgrade cv to 10.2

prob now is when i want to upgrade controller firmware to xcs11001100 it show base port changed..

why it happen???

doOdzZZ
Occasional Visitor

Re: Upgrading EVA4400 firmware & CommandView version

Hello,

 

I upgraded the ABM module on my EVA4400 to CV10.3 and now when I am trying to upgrade the firmware to 11001100, when I reach the point where I click next after I browse for the SSS file, I get redirected to the page where it says that the base port has changed.

 

Thank you in advance.