MSA Storage
1748111 Members
3518 Online
108758 Solutions
New Discussion

Re: Upgrading servers on a failover cluster with P2000 MSA storageworks

 
Don3
New Member

Upgrading servers on a failover cluster with P2000 MSA storageworks

Hi, our office is planning to inplace upgrade our failover cluster servers from W2K8 R2 to W2k12 R2.  The question is will the Storage Management Utility (SMU),  that came with the P2000 MSA storageworks, work with W2K12 R2?  I've searched HP's websites and nothing comes up when searching for variations for P2000 MSA storage works.   Any other information would be appreciated.

2 REPLIES 2
www_tank
Occasional Visitor

Re: Upgrading servers on a failover cluster with P2000 MSA storageworks

I tried to login - OK   I didn't do any actions just walk and look.  Everything shows except "System Events" (see picture - links on the gray panel )  IE version is 11.0.9600. Windows version is 2012 R2 Standart

Don't forget about CLI interface in P2000 MSA It works even from Hell :)

 

Torsten.
Acclaimed Contributor

Re: Upgrading servers on a failover cluster with P2000 MSA storageworks

>> The question is will the Storage Management Utility (SMU),  that came with the P2000 MSA storageworks, work with W2K12 R2?

 

The SMU runs on the MSA and is browser based, it works, why not? You can run SMU from another PC too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!