Storage Area Networks (SAN) - Small and Medium Business
Showing results for 
Search instead for 
Do you mean 

do we need to restart SAN switch as we change networking connection to it?

SOLVED
Go to Solution
Highlighted
Super Advisor

do we need to restart SAN switch as we change networking connection to it?

We need to make the change on network switch to the brocade SAN switch. All settings, including IP address will be all the same. Does that require to reboot the SAN switch? or is there any command I need to run on SAN switch to pick up the connection?

 

Thanks for your advice!

none
1 REPLY
Acclaimed Contributor Acclaimed Contributor

Re: do we need to restart SAN switch as we change networking connection to it?

No. IMHO you just need to unplug/plug the cable.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!