HPE EVA Storage
1748058 Members
5409 Online
108758 Solutions
New Discussion

Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

 
Adam Skaffloth
New Member

Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

I followed instructions in a previous post to the newer firmware for this switch and upgraded the switch from a2.4.1 to 2.6.2d.

The firmware upgrade seemed to go fine:
Updating flash ...
Committing configuration...done.
173440+9020+20344, csum 370d
loading to ram ......................
writing flash 0 ......................
writing flash 1 ......................
download complete
http: server initialized
firmwareDownload Done.

After reboot all ports light are orange and then led backlight turns on but nothing more.

Anyone know how to solve this?


1 REPLY 1
Ravi_Shankar
Frequent Advisor

Re: Brocade Silkworm 2800 (HP A5642A) Failed start after firmware upgrade

Try pushing Switch firmware using SAN surfer (ask HP to provide) . I have solved several firmware issue using this tool.