Command View EVA 9.2 download (not 9.2.1)

[Chris Rasmussen [FAU]]

Hi all,

I have SMS that need to be upgraded from CV EVA 9.1 to 9.3. Because this isn't a supported upgrade path I need to install CV EVA 9.2 and then CV EVA 9.3. I've got 9.3 and 9.2.1 (which I don't actually need) but I can't find where to download CV EVA 9.2.

Can anyone help me find it? A search on hp.com hasn't found anything, unfortunately.

Thanks!

[Bhavnish Kamboj (BK) · Accepted solution]

Hi Chris,

Its not available on public website as 9.3 is rolled out. Contact HP and they will provide you a FTP link from where you can download 9.2 version.


Thanks,
BK

[Torsten.]

You don't need 9.2 in order to go to 9.3.

The installer will remove the older version anyway.

Just install 9.3.

[Bhavnish Kamboj (BK)]

Hi Torsten,

Here is the bit info attached from upgrade instruction guide. You must be at 9.2 or 9.2.1 in-order to go to 9.3

I also faced the same problem like Chris here while upgrading directly from 9.1, not sure how it worked for you :-)

[Torsten.]

Read again, you *can* update, but this is not a requirement.


But you *must* have 9.2 in order to go to 9.2.1 - this is a big difference.

[Bhavnish Kamboj (BK)]

Yep, that's correct but it didn't worked for me. Do we need to remove any directories manually if we are not following the supported upgrade path or like from 9.1 to 9.3

[Torsten.]

Only english windows versions are supported, please check.

[Chris Rasmussen [FAU]]

Thanks for the info and I'm sure you *can* just install 9.3 but since this is a production system and I don't want to risk not having HP support available I'm planning to do what the documentation says and upgrade to 9.2 first. After all, that's what the compatibility guide says is *supported*.

To me that's a pretty critical point, regardless of whether or not it's possible.

[Torsten.]

The guide does not suggest to do an upgrade like this, but it says it is possible.

Keep in mind the installer will uninstall the old version and reboot before installing the new version anyway.

[Torsten.]

It's really not a requirement to have a previous version installed.

The manual says:

...
For supported upgrade paths, you do not have to remove the earlier version before upgrading to the
latest version of HP Command View EVA. During the upgrade, the following message is displayed:
IMPORTANT:
The installer has detected an earlier version of HP Command View EVA.
The following actions will be performed during upgrade:
- The earlier version will be removed.
- The system will be rebooted.
- The HP Command View EVA installation will be initiated after reboot.

...

Locate it at

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodSeriesId=471497


Document title:

HP StorageWorks Command View EVA Installation Guide (T5494-96399, September 2010)

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02523041/c02523041.pdf

[Moderator edit: Removed the broken links. Please refer to https://support.hpe.com/]