HPE EVA Storage
1748203 Members
3229 Online
108759 Solutions
New Discussion

Re: EVA 3000 UPGRADE PROBLEM

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

Re: EVA 3000 UPGRADE PROBLEM

Unfortunately the guide says

"Downgrading from VCS v4.004 to any earlier version of VCSfirmware and retaining data on the
storage system is not supported. Contact your HP-authorized service representative for more information
on VCS downgrades."



What is/was the exact 3.x and 4.x version you upgraded from/to?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ashkan_tab2003
Occasional Advisor

Re: EVA 3000 UPGRADE PROBLEM

we havent any data in this storage.

ugrade is from v 3.010 to 4.1 .

 

Torsten.
Acclaimed Contributor
Solution

Re: EVA 3000 UPGRADE PROBLEM

Looks like an unsupported upgrade path (you did not the steps between the versions).

 

If there is no data to keep (most likely there is no data to keep now), uninitialize the array from OCP (front panel, if you like), initialize it, install CV 9.4 (and probably patch 9.4.1) and get a CV licence from HP.

 

Without the licence you have 60 days to use it.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ashkan_tab2003
Occasional Advisor

Re: EVA 3000 UPGRADE PROBLEM

Thanks for your kind and response.
i find CV 7 and install it.
After that storage was detected.