EVA 6400 will not booting

[FondRGS]

Hello everyone!

One controller does not want booting (exit to failure menu), we changed the memory and battery, but it did not help. Replacement will not be soon.

Please, tell, what happened to him?

Log:

BOOT diagnostics - Build configuration information :

Baselevel ID : CR18CB
Baselevel Date : 04/19/10 15:43:55
Image built by : fus_bl
Software Version : 0953
Build Environment : delp

Marvel recommended DFCDL values
(power-on reset)
**To skip long tests, hit reset button or CTRL-R**
BIST TE 0xa0 (160): Discovery II / PM DIMM Test
pm_te_mask = 0000026d @ addr = fff3ff44
T01: Discovery II DIMM Configuration
DIMM 0 manufact JEDEC code: 0x2c, 0xff
DIMM 0 DRAM manufacturer : NONE
DIMM 0 DRAM die revision : NONE
DIMM 0 Manuf part numb is : 36VDDF25672G-33
ADDR 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ASCII
---- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -----
0000 80 08 07 0D 0C 02 48 00 04 60 70 02 82 04 04 01 ......H..`p.....
0010 0E 04 0C 01 02 26 C0 75 70 00 00 48 30 48 2A 01 .....&.up..H0H*.
0020 80 80 45 45 00 00 00 00 00 3C 48 30 28 50 00 01 ..EE.....<H0(P..
0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 F1 ................
0040 2C FF FF FF FF FF FF FF 01 33 36 56 44 44 46 32 ,........36VDDF2
0050 35 36 37 32 47 2D 33 33 35 44 32 02 00 04 28 0A 5672G-335D2...(.
0060 28 80 34 00 00 00 00 00 00 00 00 00 00 00 00 00 (.4.............
0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Socket 0: YES -- 2048 MB
Socket 1: NO
Total size: 2048 MB
Programmed refresh Rate = 7791 ns
T03: Size Access Test
One's ,8, 16, 32-bit test
Zero's ,8, 16, 32-bit test PASS
T04: DMA Interrupt Test
DMA Complete: Channel 0, 1, 2, 3,
DMA AccProt: Channel 0, 1, 2, 3,
DMA WriteProt: Channel 0, 1, 2, 3,
DMA AddMiss: Channel 0, 1, 2, 3, PASS
T06: DIMM Address Test (Efficient) PASS
T07: DIMM Pattern Test (w/DMA wrts)
Write 0xAAAAAAAA |................
Verify 0xAAAAAAAA |................PASS
Write 0x55555555 |................
Verify 0x55555555 |................PASS
T10: Discovery II ECC Test
Single-bit ECC Test PASS
DiscoII to GLUE int test
Create 1-bit errors PASS
Create 2-bit errors PASS
Create 3-bit errors PASS
Create 4-bit errors PASS


Card
bootheader edc calc = 00000000
boot image_size = 00010e18
boot image edc calc = 00000000
image_size = 0029f65c
header edc calc = 00000000
func image edc calc = 00000000 (on card)
- DECOMPRESS image 00555a9c bytes
func image edc calc = 00000000

->


Build configuration information :

Baselevel ID : CR18CB
Baselevel Date : 04/19/10 15:43:55
Image built by : fus_bl
Software Version : 09534000
Build Environment : delp

IGNORE_PFG_COOKIE_CONTENTS = 00000000
IGNORE_PFG_COOKIE = 49500000
IGNORE_PFG_DELAY = 00000000
pfg_flag = 00000000
delay_seconds = 00000000
DBAT0 08000fff 08000002
DBAT1 10001fff 10000002
DBAT2 20003fff 20000002
DBAT3 40007fff 40000002
DBAT4 f8000007 f8000002
DBAT5 80007fff 80000000
DBAT6 00000000 00000000
DBAT7 fc0007ff fc00002a
Controller WWID is 5001-4380-05DE-D012
Controller SN is PAFUCC29SYT01O
Controller Board Revision is C (3)
DebugFlags are 0x
PrintFlags are ffffx
Baselevel: CR18CBdelp (19-Apr-10 15:43:55)

?
++S_irsa->do_print = 1 PC = 1f951cx
FM(tp)--Premature termination entry, type = 2. S_irsa->termination_rdy = 1.
FM(tp)--Premature termination tt = 0x8000. tc = 0x8302206c, sa = 0x5519dc
FM(tp)--Premature termination pc = 0xc8e50. ec = 0x196, mcsr = 0xdeaddead
FM(tp)--Premature termination preparation initiated
FM(tp)--Glue Minor Revision: 85.(55), Major Revision: 85.(55)
FM(tp)--*** Program Exception (FM_TRAP_TYPE_USER): 8302206c


FM(tp)--Controller Operation Terminated:
FM(tp)-- Uptime: 151784574.
FM(tp)-- Termination Time: '17-NOV-1858 00:03:17'
FM(tp)-- TerminationCode:8302206C PC:000C8E50 Baselevel:'UUUUUUUUUUUU'
FM(tp)-- Env:'delp', DebugFlags:0x0, PrintFlags:0xFFFF
FM(tp)-- Software Version: 'UUUUUUUU', Image Type: 'PRODUCT'
FM(tp)-- Model: 'UUUUUUUU', Mode: 'Secondary'
FM(tp)-- 'Time set'
FM(tp)-- Process: 'unknown'
FM(tp)-- TP[0.]: 00000800 TP[1.]: 0052A714
FM(tp)-- TP[2.]: 00000002 TP[3.]: 00000003
FM(tp)-- TP[4.]: 020305DC TP[5.]: 005B2A3C
FM(tp)-- TP[6.]: 00000000 TP[7.]: 00000100
FM(tp)-- TP[8.]: 00000042 TP[9.]: 00000100
FM(tp)-- TP[10.]: 00000000 TP[11.]: 00000000
FM(tp)-- Stack information:
++S_irsa->do_print = 2 PC = 1d67a8x
Stack depth = 1431655766. Initial stack pointer = 0054F908
Stack entry [0.] back chain = 55555555 link register = 55555555
Stack entry [1.] back chain = 55555555 link register = 55555555
Stack entry [2.] back chain = 55555555 link register = 55555555
Stack entry [3.] back chain = 55555555 link register = 55555555
Stack entry [4.] back chain = 55555555 link register = 55555555
Stack entry [5.] back chain = 55555555 link register = 55555555
Stack entry [6.] back chain = 55555555 link register = 55555555
Stack entry [7.] back chain = 55555555 link register = 55555555
Stack entry [8.] back chain = 55555555 link register = 55555555
Stack entry [9.] back chain = 55555555 link register = 55555555
Stack entry [10.] back chain = 55555555 link register = 55555555
Stack entry [11.] back chain = 55555555 link register = 55555555
Stack entry [12.] back chain = 55555555 link register = 55555555
Stack entry [13.] back chain = 55555555 link register = 55555555
Stack entry [14.] back chain = 55555555 link register = 55555555
Stack entry [15.] back chain = 55555555 link register = 55555555
Stack entry [16.] back chain = 55555555 link register = 55555555
Stack entry [17.] back chain = 55555555 link register = 55555555
Stack entry [18.] back chain = 55555555 link register = 55555555
Stack entry [19.] back chain = 55555555 link register = 55555555
Stack entry [20.] back chain = 55555555 link register = 55555555
Stack entry [21.] back chain = 55555555 link register = 55555555
Stack entry [22.] back chain = 55555555 link register = 55555555
Stack entry [23.] back chain = 55555555 link register = 55555555
Stack entry [24.] back chain = 55555555 link register = 55555555
Stack entry [25.] back chain = 55555555 link register = 55555555
Stack entry [26.] back chain = 55555555 link register = 55555555
Stack entry [27.] back chain = 55555555 link register = 55555555
Stack entry [28.] back chain = 55555555 link register = 55555555
Stack entry [29.] back chain = 55555555 link register = 55555555
Stack entry [30.] back chain = 55555555 link register = 55555555
Stack entry [31.] back chain = 55555555 link register = 55555555
S_irsa->do_print-- = 1 PC = 1d688cx
FM(tp)-- Exception save area information at 0x005519DC:
R0: 00000000 R1: 0054F908 R2: 004C5210 R3: 601CE566
R4: 00000001 R5: 00000001 R6: 601CE566 R7: 00000001
R8: 00000014 R9: 00000044 R10: 0000005C R11: 0000005C
R12: 0000005C R13: 0052DFF0 R14: 00000000 R15: 00520000
R16: 00000000 R17: 00000000 R18: FE201002 R19: FE201002
R20: 0054FA38 R21: FE290000 R22: 00000001 R23: FE201002
R24: FE201002 R25: 00000030 R26: 005B1490 R27: 005B2A3C
R28: 01948E60 R29: 1FFF0000 R30: 00000000 R31: 00555A98
SRR0: 000C8E50 SRR1: 00020030 CR: 20000200 XER: 00000000
na1: 00000000 CTR: 00000000 LR: 000C8E40 Ecde: 00000196
Opt1: DEADDEAD Opt2: DEADDEAD na2: DEADDEAD na3: DEADDEAD
FM(tp)--Termination operations completed, not restarting
FM(tp)--safe_exit = 1. (00000001)
FM(tp)--Entering fm_hs_ocp_fm_fatal.

The processor on this controller doesn't understand dbg_map_dbat2()

EXEC_ONLY monitor for the Classic PowerPC Enterprise Controller
Version 01.09

Copyright (c) 2001-2004, 2006, Hewlett-Packard Company

:

Thanks! 

[Nodir7]

Hi.
You got to solve the problem with the controller?
If so then you've solved it.

After turning off, I had the same problem like you