HPE EVA Storage
1748134 Members
3467 Online
108758 Solutions
New Discussion

Re: Eva4400: some beginner question

 
SOLVED
Go to solution
uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

Seamonkey linux

arda10.jpeg

uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

firefox linux/windows

arda9.jpeg

 

Torsten.
Acclaimed Contributor

Re: Eva4400: some beginner question

First screenshot  is the management module itself, second is command view. Both have same IP, but different ports.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

Tried with one controller,give me controller in "attention state" and no wwn

uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

I have replaced dimm on controller2,now give another error

 

  Detailed System Information       System Configuration Name: Unknown  Initialization: Unknown  World Wide Name: 0000-0000-0000-0000  Controller model:   RoHS compliance: Yes 

Operational State Storage system: Good Controller 1: Attention Controller 2: Attention Management module: Good Controller 1 management link: Good Controller 2 management link: Good

Controller Configuration   Controller 1 (Left) Controller 2 (Right) UUID unique half: 0000-0000-0000-0000  0000-0000-0000-0000  Mastership: Unknown  Unknown  Controller hardware:     Glue:     PIC:     XCS version:   XCS build:   Management firmware: mmp-0001.4200-CR0670 

uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

Returning to cabling,i hope to did it correctly

port are  connected like this

C1=controller i/o hsv300 1

C2=controller i/o hsv300 2
port1=a
port2=b
D1=disk shelf i/o1 
D2=disk shelf i/o2

port1=c
port2=d

c1a-d1c

c1b-d2d

c2a-d1d

c2b-d2c

 

Hope is clear,maybe i will put a pic

Lights are all amber fixed on "connetion" led,but one is green

uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

Those are logs

Controller1

 

 

TE 31.(1f) - Revisions 
MIST Complete.

Completion Status: Multiple Error
  First Failed TE: 26.(1a) Test:  0.(00) Error Code: 1a000622
 Completion Status: Fault Toler
ant Hard Error
  %SFP is Not Supported%
  Failed TE: 26.(1a) Test:  0.(00) Error Code: 1a000623 BUD Address: 210c63a0
  Addr of
 Error: 00000000 78030000
  Expected Data: xxxxxxxx 0000002a Pattern: xxxxxxxx xxxxxxxx
  Actual Data:   xxxxxxxx 00000019 Mask
:    xxxxxxxx xxxxxxxx
 Completion Status: Fault Tolerant Hard Error
  %SFP is Not Supported%
  Failed TE: 26.(1a) Test:  0.(00
) Error Code: 1a000622 BUD Address: 210c6404
  Addr of Error: 00000000 78020000
  Expected Data: xxxxxxxx 0000002a Pattern: xxx
xxxxx xxxxxxxx
  Actual Data:   xxxxxxxx 00000019 Mask:    xxxxxxxx xxxxxxxx
 TE Mask: 97003d55 Completion Mask: 93003d55 BUD F
LINK: 210c63a0


OCP: (0) "Startup:CR18CBlep"
OCP: (1) "<Scanning for disks>"
OCP: (0) "Startup:CR18CBlep"
OCP: (1) "<Scanning for disks>"
OCP: (0) "Startup:CR18CBlep"
OCP: (1) "<Scanning for disks>"

Controller2

 

 

E 25.(19) - Port-to-port test

TE 26.(1a) - Tachyon func init

TE 28.(1c) - Offload PIC test

TE 31.(1f) - Revisions
MIST Complete.

Completion Status: Fault Tolerant Hard Error
  %SFP is Not Supported%
  Failed TE: 26.(1a) Test:  0.(00) Error Code: 1a000622 B
UD Address: 210c6404
  Addr of Error: 00000000 78020000
  Expected Data&colon; xxxxxxxx 0000002a Pattern: xxxxxxxx xxxxxxxx
  Actual
Data&colon;   xxxxxxxx 00000019 Mask:    xxxxxxxx xxxxxxxx
 TE Mask: 97003d55 Completion Mask: 93003d55 BUD FLINK: 210c6404


OCP: (0) "Startup:CR18CBlep"
OCP: (1) "<Scanning for disks>"

 

 

Torsten.
Acclaimed Contributor
Solution

Re: Eva4400: some beginner question

>>

SFP is Not Supported

 

Looks like you are using wrong SFPs.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

uxbeginner22
Trusted Contributor

Re: Eva4400: some beginner question

I have change cables and put new controller

Nothing to do: don't give me WWID,if i set manually error 83 is given