Flashing LEDs on VA7400 WARNING_ACTIVATED_EH

[Daniel White_2]

Hello everyone, can anyone help me with this problem?

We have a VA 7400 and jbod with a total of 25 disks installed. I arrived this morning to find that the system fault led was flashing on both units, and the disk fault led is flashing on each of the disks.

The only errors that I could find were from armlog -c myarray
Event Description = WARNING_ACTIVATED_EH One of the warning indicators has been activated. Check the extended event information for more information.
Event Unique Info =
State: bit on: 17: STATE_CHANGING_WARNING_CFM
classid: 0036, inst: 0001

and from armdsp -s myarray
Warning: The configuration of the subsystem is such that one or more drives has only a single path of access to it.

The system appears to be functioning correctly at the moment, but the warning lights are a bit scary!

Thanks in advance

Dan

[Daniel White_2]

If anyone is interested, it turned out to be the second controller in the VA7400. HP replaced it and all seems well.