Storage Area Networks (SAN) - Enterprise
Showing results for 
Search instead for 
Do you mean 

MSA 2312fc wrong enclosure ID

Regular Advisor

MSA 2312fc wrong enclosure ID

[ Edited ]

Hi,

 

I've just added a second MSA2000 dual IO enclosure to a MSA2312fc dual controller (currently with only one I/O module connected). Usually the new enclosure should have ID 2, however, it is shown as enclosure ID 3.

 

I've already performed a disk channel rescan but this didn't change anything. Does anybody know how the wrong enclosure ID can be corrected?


Thanks

 

 

 

 

 

 

 

7 REPLIES
Trusted Contributor Trusted Contributor

Re: MSA 2312fc wrong enclosure ID

Please refer the below PDF for cabling diagram which should resolve the issue

 

http://h10032.www1.hp.com/ctg/Manual/c01755933.pdf

Regular Advisor

Re: MSA 2312fc wrong enclosure ID

Thanks, the cabling looks fine to me? Ctrl A is connected to IO module A. Or is this because I only have one IO module connected?

Honored Contributor Honored Contributor

Re: MSA 2312fc wrong enclosure ID

Would this cause any issues?
Regular Advisor

Re: MSA 2312fc wrong enclosure ID

I don't think so, but it bugs me that it is not correct. But if it is not possible to correct - I guess I'll have to live with it. Thanks.

Respected Contributor Respected Contributor

Re: MSA 2312fc wrong enclosure ID

Try the following,

 

To rescan using SMU, as an Advanced Manage user:

Select Manage > Utilities > Disk Drive Utilities > Rescan.

In the Rescan For Devices panel, click Rescan.


It can take up to two minutes for the enclosure IDs to be corrected.

Respected Contributor Respected Contributor

Re: MSA 2312fc wrong enclosure ID

Ignore my last post.

 

I hope you have already tried disk channel scan but no go.

 

May be controller restart or the power cycle the array may help.

Honored Contributor Honored Contributor

Re: MSA 2312fc wrong enclosure ID

Where is this enclosure ID stored?
How and when is it selected?