eva X400 series

[ess]

Hi
i have one eva 6400 2c3d. but i now 2 enclosure add to eva EXISTENT.
how to add?
tanks for help.

[Víctor Cespón]

HP StorageWorks EVA6400/8400 M6412A disk enclosure installation instructions

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02248317/c02248317.pdf

[ess]

Hi
tanks for help
i need diagram 2c5d but this diagram not available that document.
best.

[Uwe Zessin]

Just put 3 D on one loop pair and 2D on the other ;-)

[ess]

tanks
how to add. please explain whit image.
tanks.

[Uwe Zessin · Accepted solution]

Check Figure 15.

Imagine one additional enclosure on top and move cables (01) and (04) to that enclosure.

Then imagine a second enclosure below the one on loop 2. Move cables (06) and (08) to that one.

Connect the topmost and the bottommost to the existing ones with the supplied short cables (/).

[ess]

tanks for best help.
if any image for top your explain.
your point is 1000.
very very tanks .

[ess]

hi
i have done this manage cable whit your modus operandi but number of disk enclosure 4 and 5 is change . what?
number disk is : 1-2-3-5-4
why?

[ess]

Hi
what time need to add 24 h.d.d to default disk group ?
each h.d.d is 146gb.
and how to add hard disk add all disk stage or add hard disk one by one.
tanks for the best guide.

[Víctor Cespón]

In the EVAs x400 the numbering of the enclosures does not follow the physical order. Just cable each enclosure to the one next to it.

You should have at least one disk in each enclosure. If you have to add disks, add one each minute and check in Command View that it appears OK. Then group all the disks at the same time.