Switches, Hubs, Modems (Legacy ITRC forum)
Showing results for 
Search instead for 
Do you mean 

CLI in 3Com Baseline Switch 2952-SFP

Occasional Contributor

CLI in 3Com Baseline Switch 2952-SFP

Hi,

 

I've just installed a new 3Com Baseline Switch 2952-SFP and I don't know how to access to all functionality via TELNET, I access with management access level.

 

I've just access only to this commands:

 

 initialize 
 ipsetup    
 password   
 ping       
 quit       
 reboot     
 summary    
 upgrade    

 

How can I access to all the commands?

 

I want to create a Vlan using IP subnet and I cannot do it using Web interface.

 

Thanks.

 

Regards

 

 

2 REPLIES
Advisor

Re: CLI in 3Com Baseline Switch 2952-SFP

[ Edited ]

at 3COM CLI

_cmdline-mode on

[password is] 512900

sys [to elevate to configuration prompt]

 

I started manually enumerating the command tree.  See attached.

Advisor

Re: CLI in 3Com Baseline Switch 2952-SFP

[ Edited ]

Wow.  I think I just found a goldmine:

 

I'm very giddy right now: 

 

The H3C S5500-52C-PWR-EI looks quite familiar, ey?

 

http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Switches/H3C_S5500_Serie...

 

[edit]

looks like I could be a little off with the model number, -EI switches support IPv6, and -SI switches don't.  This seems to be the difference.