Switches, Hubs, Modems (Legacy ITRC forum)
Showing results for 
Search instead for 
Do you mean 

Set Date and time in HP Procurve Switch

Occasional Visitor

Set Date and time in HP Procurve Switch

How to set date and time HP Procure 2810 Switch.
I have managed to set the time but not the date.

What CLI command should I type?
3 REPLIES
Respected Contributor Respected Contributor

Re: Set Date and time in HP Procurve Switch

Hi,

sw1-test-lab-35c(config)# time
begin-date The begin date of daylight savings time
MM/DD[/[YY]YY] New date <----------
daylight-time-rule The daylight savings time rule for your location
end-date The end date of daylight savings time
HH:MM[:SS] New time <----------
timezone The number of minutes your location is West(-) or
East(+) of GMT

sw1-test-lab-35c(config)# time
Valued Contributor Valued Contributor

Re: Set Date and time in HP Procurve Switch

Als makes sense to configure (s)ntp

"SNTP Server 1.1.1.1"
Respected Contributor Respected Contributor

Re: Set Date and time in HP Procurve Switch

use the command as this.
#time month/day/year hr:min:sec
#time timezone
#time daylight-time-rule