Switches, Hubs, Modems (Legacy Discussions)
Showing results for 
Search instead for 
Do you mean 

Procurve Manager Not connecting switches in map

SOLVED
Go to Solution
Occasional Contributor

Procurve Manager Not connecting switches in map

I have a map built with about 40 switches. The network map leaves about 10 of the switches completely orphaned. I've done rediscovery of all the switches and still nothing. The SNMP strings are ok.
They are a mixture of 2500, 2600, 2800, 8000 series. The orphaned ones include a 2510, 2810, 2626, 2520, 2512.
This used to give me a good map, but after I've added a few new switches and changed some topology I now get this unusable mess.

Thanks in advance...
4 REPLIES
Highlighted
Valued Contributor

Re: Procurve Manager Not connecting switches in map

Him

Can you check if LLDP is enable ?

bye,
Regular Advisor

Re: Procurve Manager Not connecting switches in map

rightclick on your core switch (or your seed device) and choose re-discover device and wait a bit?
Occasional Contributor

Re: Procurve Manager Not connecting switches in map

Can't say for sure, but enabling LLDP may have fixed this.
I ran it on all my switches, rediscovered most of them (why can't you rediscover whole groups on PCM??). The links still were not showing up after 30 minutes of waiting.
Rebooted for the heck of it and, go figure, they now show up.
Valued Contributor

Re: Procurve Manager Not connecting switches in map

It's a good news for you.

Bye.