Adding stape "driver" to my 10.20 hp-ux

[NubbioMassimo]

Hello to all.

This is my first post.

Im working with a beautiful Logic Analyzer 16702A.

I would like to add DLT support at my workstation (9000/779)

With Sam but even with  mk_kernel after added stape at the end of file system i get this error:

stand/build # more out.txt
/usr/ccs/bin/ld: Unsatisfied symbols:
set_caps_light (code)
/usr/ccs/bin/ld: (Warning) Linker features were used that may not be supported i
n future releases. The +vallcompatwarnings option can be used to display more de
tails, and the ld(1) man page contains additional information. This warning can
be suppressed with the +vnocompatwarnings option.

Stop.
config: make did an exit(1)

Any hints?

Really thanks.