System Administration
Showing results for 
Search instead for 
Do you mean 

HP-UX command need to display processor information

SOLVED
Go to Solution
Frequent Advisor

HP-UX command need to display processor information

Hi Everyone

Is there an HP-UX command to display processor information e.g.:

No. of processors.
For each processor:
Processor Type
Speed

etc.

- Andre
10 REPLIES
Valued Contributor Valued Contributor

Re: HP-UX command need to display processor information

hy,

speed :
# echo itick_per_usec/D | adb -k /stand/vmunix dev/mem

or
the last 2 number is the speed es: 44 >> 440Mh
# model

the number of processor :
# ioscan -fnk|grep proc

or with stm or at the similar mode to the processor speed
DM.
Honored Contributor Honored Contributor

Re: HP-UX command need to display processor information

Checkingvia cstm

performed on N4000-55 running HPUX 11.00
echo "selclass type proc;info;wait;infolog" | cstm

This will provide lots of info, firmware, errors, etc.

This will get the number of;
ncpu=$(ioscan -k|grep processor|wc -l)

To obtain on a ia64 bsystem
/usr/contrib/bin/machinfo

Also look into top (# of procs) & SAM
Frequent Advisor

Re: HP-UX command need to display processor information

Hi Mirco

The command for finding the speed did not work. However the number of processor commdn worked.

Hi Rick

This was very detailed. Thanks. interting though is that the processor speed showed up as N/A

I am using HP-UX 11.23 on a Rp3440

-Andre
Valued Contributor Valued Contributor

Re: HP-UX command need to display processor information

hy,

try this:

# echo "selclass qualifier cpu;info;wait;infowait" | cstm

DM.
Honored Contributor Honored Contributor

Re: HP-UX command need to display processor information

Not sure about /usr/contrib/bin/machinfo on HPUX 11.23 on PA-RISC. Does exist on HPUX 11.23 ia64 system.

There is SAM
# sam --> Performance Monitors --> System Properties

Will display the speed
Frequent Advisor

Re: HP-UX command need to display processor information

you can try
/opt/ignite/sbin/print_manifest
Acclaimed Contributor Acclaimed Contributor

Re: HP-UX command need to display processor information

Hi Andre,

you may use

/usr/contrib/bin/machinfo

for Itanium based systems.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Outstanding Contributor Outstanding Contributor

Re: HP-UX command need to display processor information

CPU

HPUX=/stand/vmunix

MODEL=$(grep -i $(model | tr "/" " " \
| awk '{print $NF}') \
/usr/sam/lib/mo/sched.models \
| awk '{print $NF}')

MHZ=$(echo itick_per_tick/D \
| adb -k $HPUX /dev/kmem \
| tail -1 \
| awk '{print $2/10000}')
echo `hostname` has `ioscan -k |grep -n processor \
|wc -l` $MODEL $MHZ "Mhz processor(s)"


Pete

Pete
Honored Contributor Honored Contributor

Re: HP-UX command need to display processor information

Several ways as,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=851889

1. sam -> performance monitor -> processor
2. print_manifest (if ignite-ux installed)
3. machinfo (11.23 HP versions)
4. ioscan -fnC processor
5. echo "processor_count/D" | adb /stand/vmunix /dev/kmem
6. top command to get cpu count

hth.
Easy to suggest when don't know about the problem!
Frequent Advisor

Re: HP-UX command need to display processor information

Thanks for your help everyone.