I can not restore an Ignite that was successfullyy generated.

[WilliamSmith11]

Hi
I have make an ignite, created successfully according with the messages generated from the local console.

Now when I am going to restore it, this nice messages appear.
"ERROR: The version of Ignite-UX on your tape (C.7.7.93) is different than the version of Ignite-UX on the media that the client booted (C.7.6.98).
The versions must match in order to ensure correct behavior.
Continuing the installation with a tape version mismatch is likely to cause indeterminate problems.
Do you want to continue anyway? (y/[n]):"

Into the swlist really appear
IGNITE c.7.7.93 HP-UX Installation Utilities (Ignite-UX)

The media that came with the Operating system is from september 2008.

Now how can I restore my OS?

W.S

[Mark McDonald_2]

Do you want to continue anyway? (y/[n]):"

Have you tried pressing y?

[WilliamSmith11]

Yes I do that but it seam that the restore process is going on in the right way but , it only return the

# prompt and nothing happend.

some idea?

[Javed Khan_1]

Hi,

It looks like your are booting your system from cdrom , however you have taken ignite backup on tape.

boot your system directly from tape , that should solve your problem.



Good Luck

Javed

[WilliamSmith11]

This an integrity server rx6600 ,
It does not support booting directly from the tape like the old rpxxxx system.
It is necesary use the two step restore procedure.

[Dennis Handly]

>This an integrity server rx6600, it does not support booting directly from the tape

It will if you update to the latest firmware.

>It is necessary use the two step restore procedure.

But you can also create a newer CD/DVD so you don't have that mismatch in ignite versions.

[sujit kumar singh]

ignite server software on the same system where u have created that tape archive will help u create a bootable iso file of the same version using the make_media_install command.

This ISO image u can use boot a server and then use Ignite recovery media for the rest of the install of OS.

[Pulse001]

Hi William,

Try upgrading the ignite-ux software version on the system on which you are creating the tape to C.7.6.98 and then create another tape archive.

[WilliamSmith11]

The problem was solved by adding a boot entry from the efi menu.

When I do the reconnect -r I identified the port and lun of the tape drive , then it was addes as a boot entry named as tape.

After that all ok

Thank you for helps


W.S

[丁骏鲲]

I have same,thank you!