1748109 Members
4815 Online
108758 Solutions
New Discussion юеВ

Parallel Port - SCentIf

 
SOLVED
Go to solution
Radim Jarosek
Regular Advisor

Parallel Port - SCentIf

I can't install local printer.
I have three drivers in kernel
CentIf, SCentIf,CharDrv. After trying installation printer I get that parallel interface not exists but it exists :-).

What is the SCentIf driver ?
-----------------
HP UX 10.20/700.
3 REPLIES 3
melvyn burnard
Honored Contributor

Re: Parallel Port - SCentIf

What does ioscan -fk show? how are you adding the printer, command line or SAM?
Is this and add-on card, or the built in Parallel interface on the 700 sreis? Which 700 model is it?
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Radim Jarosek
Regular Advisor

Re: Parallel Port - SCentIf

Hi,

1. This is output from ioscan -fk
------------------------------------
Class I H/W Path Driver S/W State H/W Type Description
=============================================================================
bc 0 root CLAIMED BUS_NEXUS
bc 1 10 ccio2 CLAIMED BUS_NEXUS I/O Adapter
ba 0 10/0 lba CLAIMED BUS_NEXUS PCI Bus Bridge - lba
lan 0 10/0/12/0 btlan3 CLAIMED INTERFACE PCI(10110019) -- Built-in #4
audio 0 10/0/13/0 audio CLAIMED INTERFACE Built-in Audio
ext_bus 0 10/0/14/0 side CLAIMED INTERFACE IDE
target 0 10/0/14/0.0 tgt CLAIMED DEVICE
disk 0 10/0/14/0.0.0 sdisk CLAIMED DEVICE TEAC CD-532E-B CDROM
target 1 10/0/14/0.7 tgt CLAIMED DEVICE
ctl 0 10/0/14/0.7.0 sctl CLAIMED DEVICE Initiator
ba 1 10/0/14/1 superio CLAIMED BUS_NEXUS PCI Core I/O Adapter
tty 0 10/0/14/1/1 asio0 CLAIMED INTERFACE Built-in RS-232C
tty 1 10/0/14/1/2 asio0 CLAIMED INTERFACE Built-in RS-232C
ext_bus 1 10/0/14/1/3 SCentIf CLAIMED INTERFACE Built-in Parallel Interface
usb 0 10/0/14/2 hcd CLAIMED INTERFACE Built-in USB Interface
usbhub 0 10/0/14/2.1 hub CLAIMED DEVICE USB Root Hub
usbhid 0 10/0/14/2.1.2 hid CLAIMED DEVICE USB HID Kbd(0)
usbhid 1 10/0/14/2.1.3 hid CLAIMED DEVICE USB HID Mouse(1)
ext_bus 2 10/0/15/0 c720 CLAIMED INTERFACE Ultra Narrow Single-Ended SCSI
target 2 10/0/15/0.7 tgt CLAIMED DEVICE
ctl 1 10/0/15/0.7.0 sctl CLAIMED DEVICE Initiator
ext_bus 3 10/0/15/1 c720 CLAIMED INTERFACE Ultra2 Wide LVD SCSI
target 3 10/0/15/1.6 tgt CLAIMED DEVICE
disk 1 10/0/15/1.6.0 sdisk CLAIMED DEVICE QUANTUM ATLAS10K-9LVD
target 4 10/0/15/1.7 tgt CLAIMED DEVICE
ctl 2 10/0/15/1.7.0 sctl CLAIMED DEVICE Initiator
ba 2 10/1 lba CLAIMED BUS_NEXUS PCI Bus Bridge - lba
ba 3 10/4 lba CLAIMED BUS_NEXUS PCI Bus Bridge - lba
ba 4 10/6 lba CLAIMED BUS_NEXUS PCI Bus Bridge - lba
graphics 0 10/6/2/0 graph3 CLAIMED INTERFACE PCI(103c1008) -- 2
processor 0 32 processor CLAIMED PROCESSOR Processor
memory 0 49 memory CLAIMED MEMORY Memory

2. I'm adding printer by SAM
3. It is built in Parallel interface
4. It is 9000/785


Thanks for your feedback

Radim
melvyn burnard
Honored Contributor
Solution

Re: Parallel Port - SCentIf

aha, that was the info I needed, thank you.
I believe you need the SAM patch PHCO_21186 which contains the superseded patch PHCO_19990. This contains the fix. I would also recommend you install PHKL_21099 as this appears to be the newer parallel interface you are using.
HTH
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!