HPE Community
Operating System - HP-UX
1752795 Members
5716 Online
108789 Solutions
New Discussion юеВ

Re: Physically slot place of NIC and FC

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

тАО06-01-2011 04:17 AM

тАО06-01-2011 04:17 AM

Re: Physically slot place of NIC and FC

Try

# lanadmin -x -i 900

or "901" to get a status.
Each APA related changed should be written into syslog too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Torsten.
Acclaimed Contributor

тАО06-01-2011 06:35 AM

тАО06-01-2011 06:35 AM

Re: Physically slot place of NIC and FC

Or even better use nwmgr:

# nwmgr -S apa -I 900 -v

or

# nwmgr -S apa -I 900 -A all


See

HP Auto Port Aggregation Administrator's
Guide
HP-UX 11i v3

HP Part Number: J4240-90049
Published: January 2010
Edition: January 2010, E1001


c02141675.pdf

for more information.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
itrc55
Regular Advisor

тАО06-03-2011 04:58 AM

тАО06-03-2011 04:58 AM

Re: Physically slot place of NIC and FC

Hi,

Thanks for All.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.