Operating System - HP-UX
1754054 Members
3036 Online
108811 Solutions
New Discussion юеВ

Swap is not showing by swapspace -a

 
sanjay.kumar
Occasional Advisor

Swap is not showing by swapspace -a

Swap is not showing by swapspace -a.

Is there any other command to check the detail of swap...
3 REPLIES 3
Ismail Azad
Esteemed Contributor

Re: Swap is not showing by swapspace -a

Hi,

swapspace -a??

Try the following command if you have configured device swap.

swapinfo -d

If you have configured file system swap,

swapinfo -f

Or,
swapinfo -tm
Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
Steven Schweda
Honored Contributor

Re: Swap is not showing by swapspace -a

> Swap is not showing by swapspace -a.

What _does_ happen? As usual, showing actual
commands with their actual output can be more
helpful than vague descriptions or
interpretations.

> Is there any other command to check the
> detail of swap...

On what?

uname -a
Manix
Honored Contributor

Re: Swap is not showing by swapspace -a

try this command after running "swapon -a"

# swapinfo -tam
Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 8192 0 8192 0% 0 - 1 /dev/vg00/lvol2
reserve - 8066 -8066
memory 15456 6258 9198 40%
total 23648 14324 9324 61% - 0 -

hope this will help
HP-UX been always lovable - Mani Kalra